HP 8/20q HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 45
Modifying a switch configuration, command. The Admin
View all HP 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Modifying a switch configuration To modify a switch configuration, open an Admin session with the admin start command. The Admin session prevents other accounts from making changes at the same time through Telnet, Simple SAN Connection Manager, or any other management application. To open a Config Edit session, enter the config edit command and indicate which configuration you want to modify. If you do not specify a configuration name, the active configuration is assumed. The Config Edit session provides access to the set config commands with which you make modifications to the port, switch, port threshold alarm, or zoning configuration components, as shown in the following example: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> config edit The config named default is being edited. 8/20q FC Switch (admin-config)#> set config port . . . 8/20q FC Switch (admin-config)#> set config switch . . . 8/20q FC Switch (admin-config)#> set config security . . . 8/20q FC Switch (admin-config)#> set config threshold . . . 8/20q FC Switch (admin-config)#> set config zoning . . . The config save command saves the changes you made during the Config Edit session. In this case, changes to the configuration named Default are being saved to a new configuration named config_10132003. However, the new configuration does not take effect until you activate it with the config activate command: 8/20q FC Switch (admin-config)#> config save config_10132003 8/20q FC Switch (admin)#> config activate config_10132003 8/20q FC Switch (admin)#> admin end The admin end command releases the Admin session for other administrators when you are finished making changes to the switch. To make temporary changes to the switch administrative state, enter the set switch state command. The following is an example of the set config switch command. See Table 36 for descriptions of the switch configuration parameters. 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> config edit 8/20q FC Switch (admin-config) #> set config switch A list of attributes with formatting and default values will follow. Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so. AdminState BroadcastEnabled InbandEnabled FDMIEnabled FDMIEntries DefaultDomainID DomainIDLock SymbolicName R_A_TOV E_D_TOV PrincipalPriority ConfigDescription (1=Online, 2=Offline, 3=Diagnostics) (True / False) (True / False) (True / False) (decimal value, 0-1000) (decimal value, 1-239) (True / False) (string, max=32 chars) (decimal value, 100-100000 msec) (decimal value, 10-20000 msec) (decimal value, 1-255) (string, max=64 chars) [Online ] [True ] [True ] [True ] [1000 ] [2 ] [False ] [8/20q FC Switch] [10000 ] [2000 ] [254 ] [Default Config] HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 45