HP 8/20q HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 33
Renaming a user-defined association, Copying an association, Resetting the IP security configuration
View all HP 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Renaming a user-defined association To rename a user-defined association (association_1), enter the ipsec association rename command as shown in the following example: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> ipsec edit 8/20q FC Switch (admin-ipsec) #> ipsec association rename association_1 association_4 The security association will be renamed. Please confirm (y/n): [n] y 8/20q FC Switch (admin-ipsec) #> ipsec save The IPsec configuration will be saved and activated. Please confirm (y/n): [n] y Copying an association You can copy both user-defined and dynamic associations. To copy an association (association_1), enter the ipsec association copy command as shown in the following example: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> ipsec edit 8/20q FC Switch (admin-ipsec) #> ipsec association copy association_1 association_a 8/20q FC Switch (admin-ipsec) #> ipsec save The IPsec configuration will be saved and activated. Please confirm (y/n): [n] y Resetting the IP security configuration Resetting the IP security configuration deletes all policies and associations from the switch. You can use either the ipsec clear command or the reset ipsec command to do this. In an Ipsec Edit session, enter the ipsec clear command, then save the changes as shown in the following example: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> ipsec edit 8/20q FC Switch (admin-ipsec) #> ipsec clear 8/20q FC Switch (admin-ipsec) #> ipsec save The IPsec configuration will be saved and activated. Please confirm (y/n): [n] y The reset ipsec command deletes all polices and associations from the switch, but does not require an Ipsec Edit session. 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> reset ipsec The IPsec configuration will be reset and the default values activated. Please confirm (y/n): [n] y Reset and activation in progress .... HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 33