HP 8/20q HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 164
The following is an example of the, command, ipsec association create
View all HP 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
Examples The following is an example of the ipsec association create command: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> ipsec edit 8/20q FC Switch (admin-ipsec) #> ipsec association create h2h-sh-sa A list of attributes with formatting will follow. Enter a value or simply press the ENTER key to skip specifying a value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so. Required attributes are preceded by an asterisk. Value (press ENTER to not specify value, 'q' to quit): Description (string value, 0-127 bytes) : Host-to-host:switch->host *SourceAddress (hostname, IPv4, or IPv6 Address) : fe80::2c0:ddff:fe03:d4c1 *DestinationAddress (hostname, IPv4, or IPv6 Address) : fe80::250:daff:feb7:9d02 *Protocol (1=esp, 2=esp-old, 3=ah, 4=ah-old) : 1 *SPI (decimal value, 256-4294967295) : 333 Authentication (select an authentication algorithm) 1=hmac-md5 (16 byte key) 2=hmac-sha1 (20 byte key) 3=hmac-sha256 (32 byte key) 4=aes-xcbc-mac (16 byte key) authentication algorithm choice : 2 *AuthenticationKey (quoted string or raw hex bytes): "12345678901234567890" *Encryption (select an encryption algorithm) 1=des-cbc (8 byte key) 2=3des-cbc (24 byte key) 3=null (0 byte key) 4=blowfish-cbc (5-56 byte key) 5=aes-cbc (16/24/32 byte key) 6=twofish-cbc (16-32 byte key) encryption algorithm choice : 2 *EncryptionKey (quoted string or raw hex bytes): "123456789012345678901234" The security association has been created. This configuration must be saved with the 'ipsec save' command before it can take effect, or to discard this configuration use the 'ipsec cancel' command. See also ipsec, page 160 ipsec list, page 165 ipsec policy, page 168 164 Command Reference