HP 8/20q HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 159
The following is an example of the, command, image install, image fetch, image unpack
View all HP 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
Examples The following is an example of the image install command: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> image install The switch will be reset. This process will cause a disruption to I/O traffic. Continuing with this action will terminate all management sessions, including any Telnet sessions. When the firmware activation is complete, you may log in to the switch again. Do you want to continue? [y/n]: y Press 'q' and the ENTER key to abort this command. FTP or TFTP : ftp User Account : johndoe IP Address : 10.0.0.254 Source Filename : 8.0.4.xx.xx_epc About to install image. Do you want to continue? [y/n] y Connected to 10.0.0.254 (10.0.0.254). 220 localhost.localdomain FTP server (Version wu-2.6.1-18) ready. 331 Password required for johndoe. Password: xxxxxxxxx 230 User johndoe logged in. bin 200 Type set to I. verbose Verbose mode off. This may take several seconds... The switch will now reset. Connection closed by foreign host. The following is an example of the image fetch and image unpack commands: 8/20q FC Switch (admin) #> image fetch johndoe 10.0.0.254 8.0.4.xx.xx_epc >ftp 10.0.0.254 user:johndoe password: ******** ftp>bin ftp>put 8.0.4.xx.xx_epc ftp>quit 8/20q FC Switch (admin) $>image list 8/20q FC Switch (admin) $>image unpack 8.0.4.xx.xx_epc Image unpack command result: Passed See also firmware install, page 146 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 159