HP 8/20q HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 298
zone, longer than 64 characters. Valid characters are alphanumeric
View all HP 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 298 highlights
zone Description Manages zones and zone membership on a switch. Authority Admin session and a Zoning Edit session. See the zoning edit command. The list, members, and zonesets operands are available without an Admin session. Syntax zone add [zone] [member_list] list members [zone] orphans remove [zone] [member_list] rename [zone_old] [zone_new] zonesets [zone] Operands add [zone] [member_list] Specifies one or more ports/devices given by [members] to add to the zone named [zone]. Use a to delimit aliases and ports/devices in [member_list]. A zone can have a maximum of 2,000 members. [member_list] can have any of the following formats: • Domain ID and port number pair (Domain ID, Port Number). Domain IDs can be 1-239; port numbers can be 0-255. • 6-character hexadecimal device Fibre Channel address (hex) • 16-character hexadecimal WWPN with the format xx:xx:xx:xx:xx:xx:xx:xx. • Alias name The application verifies that the [members] format is correct, but does not validate that such a member exists. You must enter the zoning save command to save your changes. copy [zone_source] [zone_destination] Creates a new zone named [zone_destination] and copies the membership into it from the zone given by [zone_source]. You must enter the zoning save command to save your changes. create [zone] Creates a zone with the name given by [zone]. A zone name must begin with a letter and be no longer than 64 characters. Valid characters are alphanumeric, _, $, ^, and -. The zoning database supports a maximum of 2,000 zones. You must enter the zoning save command to save your changes. delete [zone] Deletes the specified zone given by [zone] from the zoning database. If the zone is a component of the active zoneset, the zone will not be removed from the active zoneset until the active zoneset is deactivated. You must enter the zoning save command to save your changes. list Displays a list of all zones and the zonesets of which they are components. This operand does not require an Admin session. members [zone] Displays all members of the zone given by [zone]. This operand does not require an Admin session. orphans Displays a list of zones that are not members of any zoneset. 298 Command Reference