HP 8/20q HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 223
Table 55 Event logging configuration parameters, DHCP Dynamic Host Configuration Protocol
View all HP 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 223 highlights
Operands logging Prompts you in a line-by-line fashion to change the event logging configuration parameters described in Table 55. To configure all system parameters, omit the operand. For each parameter, enter a new value or press Enter to accept the current value. Table 55 Event logging configuration parameters Parameter LocalLogEnabled RemoteLogEnabled RemoteLogHostAddress Description Enables (True) or disables (False) the saving of log information on the switch. The default is True. Enables (True) or disables (False) the recording of the switch event log on a remote host that supports the syslog protocol. The default is False. The IP address (version 4 or 6) or DNS host name of the host that will receive the switch event log information if remote logging is enabled. The default is 10.0.0.254. Operands ntp Prompts you in a line-by-line fashion to change the NTP server configuration parameters described in Table 56. To configure all system parameters, omit the operand. For each parameter, enter a new value or press Enter to accept the current value. Table 56 NTP server configuration parameters Parameter NTPClientEnabled NTPServerDiscovery NTPServerAddress Description Enables (True) or disables (False) the Network Time Protocol (NTP) client on the switch. This client enables the switch to synchronize its time with an NTP server. This feature supports NTP version 4 and is compatible with version 3. An Ethernet connection to the server is required and you must first set an initial time and date on the switch. The synchronized time becomes effective immediately. The default is False. NTP boot method: • 1-Static • 3-DHCP (Dynamic Host Configuration Protocol) • 3-DHCP version 6 The default is Static. The IP address (version 4 or 6) or DNS host name of the NTP server from which the NTP client acquires the time and date. The default is 10.0.0.254. Operands timers Prompts you in a line-by-line fashion to change the timer configuration parameters described in Table 57. To configure all system parameters, omit the operand. For each parameter, enter a new value or press Enter to accept the current value. HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 223