HP 8/20q HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 44
Managing switch configurations, Displaying a list of switch configurations
View all HP 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Managing switch configurations The switch configuration determines the basic operational characteristics of the switch. A switch can store up to 10 configurations, including the default configuration (Default Config). The current switch operating characteristics are determined by the active configuration. Only one configuration can be active at a time. Each switch configuration contains switch, port, port threshold alarm, and zoning configuration components. Displaying a list of switch configurations To display the configurations stored on the switch, enter the config list command, as shown in the following example. Notice that the config list command does not require an Admin session. 8/20q FC Switch #> config list Current list of configurations default config_1 config_2 Activating a switch configuration To activate a switch configuration (config_1), enter the config activate command in an Admin session, as shown in the following example: 8/20q FC Switch (admin) config activate config_1 Copying a switch configuration To create a copy of an existing configuration, enter the config copy command in an Admin session, as shown in the following example: 8/20q FC Switch (admin) config copy config_1 config_2 Deleting a switch configuration To delete a configuration from the switch, enter the config delete command in an Admin session, as shown in the following example. You cannot delete either the active configuration or the default configuration (Default Config). 8/20q FC Switch (admin) config delete config_2 44 Switch Configuration