HP 8/20q HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 199
set config security portbinding, Table 35 Port binding configuration parameters, Description
View all HP 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
set config security portbinding Description Configures port binding. Authority Admin session and a Config Edit session Syntax set config security portbinding [port_number] Operands [port_number] Initiates an editing session in which to change the port binding configuration for the port given by [port_number]. The system displays each parameter one line at a time and prompts you for a value. For each parameter, enter a new value or press Enter to accept the current value shown in brackets. Enter q or Q to end the editing session. Table 35 describes the set config security portbinding parameters. Table 35 Port binding configuration parameters Parameter PortBindingEnabled WWN Description Enables (True) or disables (False) port binding for the port given by [port_number]. The default is False. Worldwide port name for the port/device that is allowed to connect to the port given by [port_number]. Examples The following is an example of the set config security portbinding command: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) config edit 8/20q FC Switch (admin-config) #> set config security portbinding 1 A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so. PortBindingEnabled (True / False)[False] true WWN (N=None / WWN)[None ] 10:00:00:c0:dd:00:b9:f9 WWN (N=None / WWN)[None ] 10:00:00:c0:dd:00:b9:f8 WWN (N=None / WWN)[None ] n Finished configuring attributes. This configuration must be saved (see config save command) and activated (see config activate command) before it can take effect. To discard this configuration use the config cancel command. See also show config security portbinding, page 237 HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 199