HP 8/20q HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 96
Copying a group, Adding members to a group, Modifying a group member, Table 8
View all HP 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Copying a group To copy the contents of an existing group (group_port) to a new group (port_1), enter the group copy command, as shown in the following example: 8/20q FC Switch (admin-security) #> group copy group_port port_1 Adding members to a group Adding a member to a group involves specifying a group, the member worldwide name, and the member attributes. The member attributes define the authentication method, encryption method, secrets, and fabric binding, depending on the group type. • For ISL member attributes, see Table 8. • For Port member attributes, see Table 9. • For MS member attributes, see Table 10. To add a member to a group, enter the group add command, as shown in the following example: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> security edit 8/20q FC Switch (admin-security) #> group add Group_1 A list of attributes with formatting and default values will follow Enter a new value or simply press the ENTER key to accept the current value with exception of the Group Member WWN field which is mandatory. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so. Group Name Group_1 Group Type ISL Member (WWN) 10:00:00:c0:dd:00:90:a3 [00:00:00:00:00:00:00:00] Authentication (None / Chap) [None ] chap PrimaryHash (MD5 / SHA-1) [MD5 ] PrimarySecret (32 hex or 16 ASCII char value) [ ] 0123456789abcdef SecondaryHash (MD5 / SHA-1 / None) [None ] SecondarySecret (40 hex or 20 ASCII char value) [ ] Binding (domain ID 1-239, 0=None) [0 ] Finished configuring attributes. To discard this configuration use the security cancel command. Modifying a group member Modifying a group member involves changing the member attributes. The member attributes define the authentication method, encryption methods, secrets, and fabric binding, depending on the group type. • For ISL member attributes, see Table 8. • For Port member attributes, see Table 9. • For MS member attributes, see Table 10. To change the attributes of a group member, enter the group edit command, as shown in the following example: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> security edit 8/20q FC Switch (admin-security) #> group edit G1 10:00:00:c0:dd:00:90:a3 A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the current value. 96 Device Security Configuration