HP 8/20q HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 23
IPv6 configuration
View all HP 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
IPv6 configuration The switch supports IPv6, which includes the following: • Network discovery method • IP address • IP gateway address The network discovery method determines how the switch acquires its IP address. The IP address can come from the IP address (static) that resides on the switch or from a DHCP server; or it can be learned from a router through the Neighbor Discovery Protocol (NDP). To configure the IPv6 parameters, enter the set setup system ipv6 command: 8/20q FC Switch (admin) #> set setup system ipv6 A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so. Current Values: EthIPv6NetworkEnable EthIPv6Discovery EthIPv6NetworkAddress EthIPv6GatewayAddress False Static New Value (press ENTER to accept current value, 'q' to quit, 'n' for none): EthIPv6NetworkEnable (True / False) : EthIPv6Discovery (1=Static, 2=Dhcpv6, 3=Ndp) : EthIPv6NetworkAddress (IPv6 Address/Mask Length format) : EthIPv6GatewayAddress (IPv6 Address) : Do you want to save and activate this system setup? (y/n): [n] HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Guide 23