HP 8/20q HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 272
show switch, Table 65 Switch operational parameters, Programmable Read-only Memory PROM boot version
View all HP 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 272 highlights
show switch Description Displays switch operational information. Authority None Syntax show switch Notes Table 65 describes the switch operational parameters. Table 65 Switch operational parameters Parameter SymbolicName SwitchWWN BootVersion CreditPool DomainID FirstPortAddress FlashSize - MBytes LogFilterLevel MaxPorts NumberOfResets ReasonForLastReset ActiveImageVersion-build date PendingImageVersion-build date ActiveConfiguration AdminState AdminModeActive BeaconOnStatus OperationalState PrincipalSwitchRole POSTFaultCode POSTStatus TestFaultCode TestStatus BoardTemp (1) - Degrees Celsius SwitchTemperatureStatus Description Descriptive name for the switch Switch worldwide name Programmable Read-only Memory (PROM) boot version Number of port buffer credits available to recipient ports Switch domain ID Fibre Channel address of switch port 0 Size of the flash memory, in megabytes Event severity level, used to record events in the event log Number of ports available on the switch Number of times the switch has been reset over its service life Action that caused the last reset Active firmware image version and build date Firmware image version and build date that is pending. This image will become active at the next reset or power-cycle. Name of the switch configuration that is in use. Switch administrative state Admin session status Beacon status as set by the set beacon command Switch operational state Principal switch status. True indicates that this switch is the principal switch. Fault code from the most recent power-on self test Status from the most recent power-on self test Fault code from the most recent switch test Status from the most recent switch test Internal switch temperature at circuit board sensor 1 Normal, warning, failure 272 Command Reference