HP 8/20q HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 180
reset, Table 17
View all HP 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
reset Description Resets the switch configuration parameters. If you omit the operand, the default is reset switch. Authority Admin session Syntax reset callhome config [config_name] factory ipsec port [port_list] radius security services snmp switch (default) system zoning Operands callhome Resets the Call Home database configuration to its default values. config [config_name] Resets the configuration given by [config_name] to the factory default values for switch, port, port threshold alarm, and zoning configuration as described in Table 17 through Table 30. If [config_name] does not exist on the switch, a configuration with that name will be created. If you omit [config_name], the active configuration is reset. You must activate the configuration for the changes to take effect. factory Resets switch configuration, port configuration, port threshold alarm configuration, zoning configuration, SNMP configuration, system configuration, security configuration, RADIUS configuration, switch services configuration, zoning configuration, and Call Home configuration to the factory default values as described in Table 17 through Table 30. The switch configuration is activated automatically. NOTE: Because this operand changes network parameters, the workstation could lose communication with the switch and release the Admin session. This operand does not affect installed license keys. ipsec Resets the IP security database configuration to its default values. port [port_list] Reinitializes one or more ports given by [port_list]. [port_list] can be a set of port numbers and ranges delimited by spaces. For example, 0 2 10-15 specifies ports 0, 2, 10, 11, 12, 13, 14, and 15. radius Resets the RADIUS configuration to the default values as described in Table 22. security Clears the security database and deactivates the active security set. The security configuration value, autosave, and fabric binding remain unchanged. services Resets the switch services configuration to the default values as described in Table 23. snmp Resets the SNMP configuration settings to the factory default values. See Table 21 for SNMP configuration default values. 180 Command Reference