HP 8/20q HP StorageWorks 8/20q Fibre Channel Switch Command Line Interface Gui - Page 22
Configuring the Ethernet port, IPv4 configuration
View all HP 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Configuring the Ethernet port Use the set setup system command in an Admin session to configure the Ethernet port and other network parameters. You can configure all of the following parameters in one session, or you can configure specific parameters by adding the corresponding keyword: • IPv4 configuration, page 22 • IPv6 configuration, page 23 • DNS server configuration, page 24 IPv4 configuration The switch supports IPv4, which includes the following: • Network discovery method • IP address • Subnet mask • IP gateway address The network discovery method determines how the switch acquires its IP address. The IP address can come from the IP address that resides on the switch or from a server. The switch supports network discovery from the following server types: • Bootstrap Protocol (BootP) • Reverse Address Resolution Protocol (RARP) • Dynamic Host Configuration Protocol (DHCP) To configure the IPv4 parameters, enter the set setup system ipv4 command: 8/20q FC Switch (admin) #> set setup system ipv4 A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so. Current Values: EthIPv4NetworkEnable True EthIPv4NetworkDiscovery Static EthIPv4NetworkAddress 10.20.116.133 EthIPv4NetworkMask 255.255.255.0 EthIPv4GatewayAddress 10.20.116.1 New Value (press ENTER to accept current value, 'q' to quit, 'n' for none): EthIPv4NetworkEnable (True / False) : EthIPv4NetworkDiscovery (1=Static, 2=Bootp, 3=Dhcp, 4=Rarp) : EthIPv4NetworkAddress (dot-notated IP Address) : 10:20:30:40 EthIPv4NetworkMask (dot-notated IP Address) : 255.0.0.0 EthIPv4GatewayAddress (dot-notated IPv4 Address) : 10.20.30.254 Do you want to save and activate this system setup? (y/n): [n] y 22 Network Configuration