HP Color LaserJet CP2025 HP Color LaserJet CP2020 Series - User Guide - Page 24

Service menu, Use this menu to restore default settings, clean the product - always cleaning

Page 24 highlights

Service menu Use this menu to restore default settings, clean the product, and activate special modes that affect print output. Menu item Cleaning mode Sub-menu item PowerSave USB speed High Full Less paper curl Off On Archive print Off On Restore defaults Yes No Description Use this option to clean the product if you see toner specks or other marks on the printed output. The cleaning process removes dust and excess toner from the paper path. When you select this item, the product prompts you to load plain paper in tray 1 and then press OK to start the cleaning process. Wait until the process is complete. Discard the page that prints. Sets how long the product remains idle before it enters PowerSave mode. The product automatically exits PowerSave mode when you send a print job or press a controlpanel button. The default setting is 15 minutes. Sets the USB speed to High or Full. For the product to actually operate at high speed, it must have high speed enabled and be connected to an EHCI host controller that is also operating at high speed. This menu item also does not reflect the current operating speed of the product. The default setting is High. If printed pages are consistently curled, use this option to set the product to a mode that reduces curl. The default setting is Off. If you are printing pages that will be stored for a long time, use this option to set the product to a mode that reduces toner smearing and dusting. The default setting is Off. Sets all customized settings to the factory default values. 14 Chapter 2 Control panel ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166

Service menu
Use this menu to restore default settings, clean the product, and activate special modes that affect print
output.
Menu item
Sub-menu item
Description
Cleaning mode
Use this option to clean the product if you see toner specks or
other marks on the printed output. The cleaning process
removes dust and excess toner from the paper path.
When you select this item, the product prompts you to load
plain paper in tray 1 and then press
OK
to start the cleaning
process. Wait until the process is complete. Discard the page
that prints.
PowerSave
Sets how long the product remains idle before it enters
PowerSave
mode. The product automatically exits
PowerSave
mode when you send a print job or press a control-
panel button.
The default setting is
15 minutes
.
USB speed
High
Full
Sets the USB speed to
High
or
Full
. For the product to actually
operate at high speed, it must have high speed enabled and
be connected to an EHCI host controller that is also operating
at high speed. This menu item also does not reflect the current
operating speed of the product.
The default setting is
High
.
Less paper curl
Off
On
If printed pages are consistently curled, use this option to set
the product to a mode that reduces curl.
The default setting is
Off
.
Archive print
Off
On
If you are printing pages that will be stored for a long time, use
this option to set the product to a mode that reduces toner
smearing and dusting.
The default setting is
Off
.
Restore defaults
Yes
No
Sets all customized settings to the factory default values.
14
Chapter 2
Control panel
ENWW