HP Color LaserJet CP2025 HP Color LaserJet CP2020 Series - User Guide - Page 48

Con the product on the network, View settings, Network configuration Configuration

Page 48 highlights

Configure the product on the network To configure network parameters on the product, use the product control panel, or the embedded Web server. For Windows operating systems, use the HP ToolboxFX software. For Mac OS X, use the Utility button. Set up the product on the network Hewlett-Packard recommends that you use the HP software installer on the product CD-ROM to set up printer drivers for networks. NOTE: You must connect the printer to your network prior to starting the software installation. This product supports a 10/100 network connection. Plug the network cable into the product and your network connection. View settings Network configuration page The network configuration page lists the current settings and properties of the product network card. To print the network configuration page from the product, complete the following steps. 1. On the control panel, press OK. 2. Use the arrow buttons to select Reports, and then press OK. 3. Use the arrow buttons to select Network report, and then press OK. Configuration page The configuration page lists the current settings and properties of the product. To print the configuration page from the product, complete the following steps. 1. On the control panel, press OK. 2. Use the arrow buttons to select Reports, and then press OK. 3. Use the arrow buttons to select Config report, and then press OK. 38 Chapter 5 Connectivity ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166

Configure the product on the network
To configure network parameters on the product, use the product control panel, or the embedded Web
server. For Windows operating systems, use the HP ToolboxFX software. For Mac OS X, use the
Utility
button.
Set up the product on the network
Hewlett-Packard recommends that you use the HP software installer on the product CD-ROM to set up
printer drivers for networks.
NOTE:
You
must
connect the printer to your network prior to starting the software installation.
This product supports a 10/100 network connection. Plug the network cable into the product and your
network connection.
View settings
Network configuration page
The network configuration page lists the current settings and properties of the product network card. To
print the network configuration page from the product, complete the following steps.
1.
On the control panel, press
OK
.
2.
Use the arrow buttons to select
Reports
, and then press
OK
.
3.
Use the arrow buttons to select
Network report
, and then press
OK
.
Configuration page
The configuration page lists the current settings and properties of the product. To print the configuration
page from the product, complete the following steps.
1.
On the control panel, press
OK
.
2.
Use the arrow buttons to select
Reports
, and then press
OK
.
3.
Use the arrow buttons to select
Config report
, and then press
OK
.
38
Chapter 5
Connectivity
ENWW