HP DL760 HP ProLiant DL760 Generation 2 Server User Guide - Page 101
Full-length self-latching slot-keeper feature - quickspecs
UPC - 613326397428
View all HP DL760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Installing Hardware Options, Server Power Off 5. Connect the expansion board I/O cable as appropriate. HP has designed a self-latching slot-keeper feature to accommodate full-length expansion boards. Be sure that the V-shaped slot-keeper tabs on the plastic expansion board guide are positioned over the forward end of the expansion board. Using the slot keepers is especially important when expansion boards are added or when the server is moved. Figure 4-9: Full-length self-latching slot-keeper feature 6. Close the I/O lid, and slide the server into the rack. 7. Connect all power cords and power up the server (refer to Chapter 7). 8. If necessary, run the ROM-Based Setup Utility, as described in Chapter 8. NOTE: For a list of supported I/O expansion boards, refer to the HP QuickSpecs for the ProLiant DL760 G2 servers at www.hp.com/products/servers/platforms. NOTE: Each PCI-X bus is automatically configured to run in the most advanced mode (PCI-X or PCI) and the highest frequency supported by all expansion boards installed in the slots on the bus. 4-12 HP ProLiant DL760 Generation 2 Server User Guide