HP DL760 HP ProLiant DL760 Generation 2 Server User Guide - Page 102
Installing the Remote Insight Lights-Out Edition II
UPC - 613326397428
View all HP DL760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Installing Hardware Options, Server Power Off Installing the Remote Insight Lights-Out Edition II The ProLiant DL760 G2 server supports the Remote Insight Lights-Out Edition (RILOE) II with a Remote Management connector (30-pin) located on the I/O board. To install RILOE II: 1. If you have previously powered up the server, back up your server data. 2. Shut down the operating system as directed in your operating system instructions. 3. Power down the server (refer to Chapter 7). 4. Disconnect the power cords from the server. 5. Slide the server out of the rack. 6. Open the I/O lid as shown in Chapter 3. HP ProLiant DL760 Generation 2 Server User Guide 4-13
Installing Hardware Options, Server Power Off
Installing the Remote Insight Lights-Out Edition II
The ProLiant DL760 G2 server supports the Remote Insight Lights-Out Edition
(RILOE) II with a Remote Management connector (30-pin) located on the I/O board.
To install RILOE II:
1.
If you have previously powered up the server, back up your server data.
2.
Shut down the operating system as directed in your operating system instructions.
3.
Power down the server (refer to Chapter 7).
4.
Disconnect the power cords from the server.
5.
Slide the server out of the rack.
6.
Open the I/O lid as shown in Chapter 3.
HP ProLiant DL760 Generation 2 Server User Guide
4-13