HP DL760 HP ProLiant DL760 Generation 2 Server User Guide - Page 149

Installing Hardware Options, Hot-Pluggable Installing a Hot-Plug Power Supply The ProLiant DL760 G2 server ships with two hot-plug power supplies. The system power in the ProLiant DL760 G2 server does not have to be shut off to replace one of the power supplies. WARNING: To reduce the risk of electric shock or damage to the equipment: • Install the power supply before connecting the power cord to it. • Unplug the power cord before removing the power supply from the server. • Disconnect power from the server by unplugging all power cords from either the electrical outlet or the server. CAUTION: To prevent data corruption, do not connect the server to a low line power source (110 VAC). Low line power is not supported. IMPORTANT: Most system configurations require 200-240 VAC. Use 200-240 VAC line cords to power the server. NOTE: A few server configurations may exceed the power rating of a single power supply resulting in a loss of power redundancy for the server. Use the ProLiant DL760 G2 Power Calculator available on ActiveAnswers to ensure that power redundancy will be maintained for your configuration. 5-34 HP ProLiant DL760 Generation 2 Server User Guide