HP DL760 HP ProLiant DL760 Generation 2 Server User Guide - Page 131

Installing Hardware Options, Hot-Pluggable To replace DIMMs: 1. Unlock the cartridge and slide it out of the server following the procedure in the "Removing the Memory Cartridge" section of this chapter. CAUTION: Do not remove a memory cartridge if the cartridge power LED is blinking or is solid green. The system will halt. 2. Lift the memory cartridge cover and remove the failed DIMM. 3. Replace the failed DIMM with a working DIMM of the same speed, type, and size. It should have the same part number (for example 123456-12x, where x is not required to match). CAUTION: When handling a memory module, be careful not to touch any of the contacts. Doing so can damage the module. NOTE: Be sure memory modules are installed in proper orientation. The modules are keyed to ensure that they are installed correctly in the memory socket. 4. Be sure that all of the DIMM socket levers are rotated inward before closing the cartridge cover and then close the memory cartridge cover. 5. Insert the memory cartridge in the server and secure it in place by closing the cartridge ejector lever. 6. Lock the memory cartridge in place by rotating the cartridge lock clockwise to the locked position. 7. The system will rebuild and verify the data on the DIMMs in the memory cartridge as the cartridge power LEDs are blinking. This process is complete when the cartridge power LED is illuminated solid green, indicating that the cartridge is online. 8. Continue with normal server operation. 5-16 HP ProLiant DL760 Generation 2 Server User Guide