HP DL760 HP ProLiant DL760 Generation 2 Server User Guide - Page 210
Option ROM Configuration for Arrays, RAID 0, and RAID 5 configurations
UPC - 613326397428
View all HP DL760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 210 highlights
Configuring the Server Option ROM Configuration for Arrays After the POST sequence successfully concludes, the server executes the option ROMs. An option ROM is the code programmed in the read-only memory (ROM) of any PCI expansion boards or embedded devices that are installed in the server. Option ROMs allow you to make hardware configuration changes for each PCI expansion board. These settings are retained when the server is powered down so that they can be restored the next time the server is powered up. The ORCA utility is a hardware-level configuration program that is embedded in the option ROM of the controller. ORCA is also embedded into the ROM of other array controllers. ORCA provides the following benefits: • Because it is loaded from ROM, it does not require diskettes or CDs to run. • It can be started on initial power-up. • It can configure any number of drives. • It can be executed during any boot sequence. • It allows easy configuration of the following: - RAID 0, RAID 1, RAID 1+0, and RAID 5 configurations - Online spare (hot spare) - Boot controller order • It allows independent configuration control over each logical drive. HP ProLiant DL760 Generation 2 Server User Guide 8-17