HP DL760 HP ProLiant DL760 Generation 2 Server User Guide - Page 271

Troubleshooting Information NOTE: ASR-2 can be enabled to restart your server and automatically load the operating system. If a critical error occurs, ASR-2 logs the error in the Integrated Management Log (IML) and restarts the server. The system ROM then pages the designated administrator and executes the normal restart process. 6. Restart the server. 7. Check the Integrated Management Display (IMD) for the following normal power-up sequence to verify that your system meets the minimal hardware requirements and is powered up under normal operation: a. The front panel system power LED turns from Standby (blinking green) to On (solid green). b. The fans start up. c. The IMD displays messages regarding the server name and LCD firmware version. d. The IMD displays messages in the following sequence regarding server initialization: - System initialization - PCI auto-configuration - Video initialization. If a monitor is connected, it also displays the HP initialization screen. - Processor initialization - Memory test - Memory initialization - Diskette drive - Option ROM - SCSI devices 8. The operating system loads to complete the boot process. If completing these steps does not solve the problem, continue with the following section. HP ProLiant DL760 Generation 2 Server User Guide E-3