HP DL760 HP ProLiant DL760 Generation 2 Server User Guide - Page 137

Installing Hardware Options, Hot-Pluggable f. Lock the memory cartridge in place by rotating the cartridge lock clockwise to the locked position. g. The system will rebuild and verify the data on the DIMMs in the memory cartridge as the cartridge power LEDs are blinking. This process is complete when the cartridge power LED is illuminated solid green, and the cartridge is online. h. Memory cartridge 1 is online but the newly installed memory has not been activated. The DIMM status LEDs for the newly installed DIMMs will be blinking. IMPORTANT: The memory cartridge power LED must be illuminated solid before you can unlock the next memory cartridge. 2. Repeat step 1 with memory cartridges 2, 3, 4, and 5. Memory cartridges 2, 3, 4, and 5 will not come online unless their memory configurations match cartridge 1. 3. After cartridge 5 is online, the newly added memory can be made available to the operating system. By default, the additional memory is made available to the system immediately after memory cartridge 5 comes online. IMPORTANT: Do not unlock any of the memory cartridges while one or all of the memory cartridges are rebuilding. 4. All of the DIMM status LEDs should go off. 5. All five memory cartridge power LEDs will blink as the memory is made available to the operating system. This process is complete when all five memory cartridge power LEDs stop blinking and illuminate solid green. The hot-upgrade is complete and normal server operation can resume. 5-22 HP ProLiant DL760 Generation 2 Server User Guide