HP DL760 HP ProLiant DL760 Generation 2 Server User Guide - Page 157
Table 5-5, I/O Expansion Slots
UPC - 613326397428
View all HP DL760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Installing Hardware Options, Hot-Pluggable Table 5-5: I/O Expansion Slots Slot Description Slots 1 and 2 Bus 19-Supports PCI-X expansion boards at 100 MHz and 66 MHz or PCI expansion boards at 66 MHz and 33 MHz; it is keyed for 3.3v signaling. Slots 3 and 4 Bus 13-Supports PCI-X expansion boards at 100 MHz and 66 MHz or PCI expansion boards at 66 MHz and 33 MHz; it is keyed for 3.3v signaling. Slots 5 and 6 Bus 11-Supports PCI-X expansion boards at 100 MHz and 66 MHz or PCI expansion boards at 66 MHz and 33 MHz; it is keyed for 3.3v signaling. Slots 7 and 8 Bus 7-Supports PCI-X expansion boards at 100 MHz and 66 MHz or PCI expansion boards at 66 MHz and 33 MHz; it is keyed for 3.3v signaling. Slot 9 Bus 0-Supports PCI expansion boards at 33 MHz; it is keyed for 5v signaling. Slots 10 and 11 Bus 3-Supports PCI-X expansion boards at 100 MHz and 66 MHz or PCI expansion boards at 66 MHz and 33 MHz; it is keyed for 3.3v signaling. Note: The operating system detects PCI devices in the following slot order: 9-10-11-7-8-5-6-3-4-12. NOTE: It is recommended that you install the optional RILOE II board into slot 9. NOTE: Each PCI-X bus will automatically configure to run in the most advanced mode (PCI-X or PCI) and the highest frequency supported by all expansion boards installed in the slots on the bus. NOTE: The ProLiant DL760 G2 server ships with a NIC preinstalled in slot 11. 5-42 HP ProLiant DL760 Generation 2 Server User Guide