HP DL760 HP ProLiant DL760 Generation 2 Server User Guide - Page 212

Configuring the Server Using ORCA To configure the drive array controller: CAUTION: If you have installed any previously used hard drives in the ProLiant DL760 G2 server, you must delete any array configuration information that those drives contain. Doing so destroys any data on those hard drives. 1. If you have any previously used hard drives installed in the server, select View Logical Drive, and then press the Enter key to view the configuration of the drives. If you do not see any logical drives configured, press the Esc key to return to the ORCA main menu, and then proceed to step 2. If you do see an existing logical drive or drives, do the following: a. Press the Esc key to return to the main menu. b. From the main menu, select Delete Logical Drive. The Delete Logical Drive screen displays. c. Follow the instructions on the screen to delete the logical drive or drives. After the drives have been deleted, you are returned to the main menu. 2. Select Create Logical Drive, and then press the Enter key. 3. Follow the screen prompts to define the RAID configuration. For more information about configuring your specific array controller, refer to the documentation that comes with your array controller, or refer to the HP website: www.hp.com/support/storage/index.shtml From this website, click Array and SCSI controllers, and then navigate to the appropriate controller information. 4. When you have finished configuring the array, press the Esc key to exit ORCA. HP ProLiant DL760 Generation 2 Server User Guide 8-19