HP Integrity rx8620 HP Insight Manager WBEM Provider Events Reference - Page 100
cause MP Bus communications failures. Recommended Action: Contact your HP
View all HP Integrity rx8620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Event ID Event Severity Event Description 12228 Warning Over-Temperature or power condition detected for processor. Probable Cause: The processor temperature or power has exceeded normal limits. The Enhanced Thermal Management (ETM) feature of the processor has been employed to reduce the chip power to allow operation within normal limits. If this condition persists, this will have an adverse impact on the performance of this processor. Recommended Action: Check that there are no issues with the cooling, and if the problem persists contact HP service. WBEM EventID: 6836. WBEM ProviderName: FPL_IndicationProvider 12229 Warning An error occurred while checking the fabricless boot state. Probable Cause: System firmware was unable to access the fabric graph or the expected vertex was not found Recommended Action: This is a symptom of a problem, not the cause. Look for additional IPMI event logs that more accurately describe the problem. Contact your HP Support Representative to investigate the fabric. WBEM EventID: 6775. WBEM ProviderName: FPL_IndicationProvider 12230 Warning System firmware was unable to clear the link error masks. Probable Cause: This event does not indicate the original cause. This is a problem encountered while handling a fabric link error. Recommended Action: Collect IPMI event logs to determine the original cause of the error. Contact your HP Support Representative to troubleshoot the fabric WBEM EventID: 6776. WBEM ProviderName: FPL_IndicationProvider 12231 Warning System firmware could not determine a link's address. Probable Cause: This event does not indicate the original cause. This is a problem encountered while handling a fabric link error. Recommended Action: Collect IPMI event logs to determine the original cause of the error. Contact your HP Support Representative to troubleshoot the fabric WBEM EventID: 6777. WBEM ProviderName: FPL_IndicationProvider 12232 Warning System firmware was unable to turn a bad link off. Probable Cause: This event does not indicate the original cause. This is a problem encountered while handling a fabric link error. Recommended Action: Collect IPMI event logs to determine the original cause of the error. Contact your HP Support Representative to troubleshoot the fabric WBEM EventID: 6778. WBEM ProviderName: FPL_IndicationProvider 12244 Error The windows watchdog timer has expired. The partition associated with the cell with the expired timer will be reset. Probable Cause: Windows had configured the Windows watchdog timer to either reset or power off the nPartition on a timeout and the Windows watchdog timer has expired without being refreshed. The nPartition will either be reset or powered off. Recommended Action: Investigate the operating system, drivers, Windows applications and event logs for possible causes. If hardware is suspected, contact HP customer support. WBEM EventID: 6867. WBEM ProviderName: FPL_IndicationProvider 12251 Error An entity's MP Bus communications controller is reporting a hardware revision that is known to cause MP Bus communications failures. Probable Cause: An entity's MP Bus communications controller is reporting a hardware revision that is known to cause MP Bus communications failures. Recommended Action: Contact your HP Service Representative to investigate the failing hardware. WBEM EventID: 6875. WBEM ProviderName: FPL_IndicationProvider 12255 Error 12v power to a PCI slot located on the IO Chassis has power faulted. Probable Cause: Main power at the PCI slot located on the IO Chassis has faulted. Recommended Action: contact HP support. WBEM EventID: 6877. WBEM ProviderName: FPL_IndicationProvider 12289 Warning SFW detected a failure while optimizing the fabric. Probable Cause: Failure detected by SFW while the optimizing fabric. Recommended Action: Collect IPMI events and contact your HP Support Representative for assistance. WBEM EventID: 6888. WBEM ProviderName: FPL_IndicationProvider 12291 Error A critical failure occurred during a cell online add or delete. Probable Cause: A critical failure occurred during a cell online add or delete. Recommended Action: This event should not happen. Please contact HP. WBEM EventID: 6906. WBEM ProviderName: FPL_IndicationProvider 100 WBEM Provider Event Tables