HP Integrity rx8620 HP Insight Manager WBEM Provider Events Reference - Page 87

Failure reading Redundant Clock Source RCS or Hot Swap Oscillator HSO boards

Get HP Integrity rx8620 PDF manuals and user guides View all HP Integrity rx8620 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 87 highlights

Event ID Event Severity Event Description 11471 Error Clock fault for clocks supplied from the Hot Swap Oscillator (HSO) board to the system backplane. HSO has reported a fault or has been removed. The data field contains the physical location of the HSO. Probable Cause: HSO assembly has reported a fault or has been removed. Recommended Action: Check HSO assembly. WBEM EventID: 4915. WBEM ProviderName: FPL_IndicationProvider 11478 Warning The operational clock frequencies do not match between the Redundant Clock Source (RCS) and the Hot Swap Oscillator (HSO). The data field contains the physical location of the HSO. Probable Cause: Operating frequency of the HSO does not match that of the RCS. Recommended Action: Check HSO assembly. WBEM EventID: 4916. WBEM ProviderName: FPL_IndicationProvider 11479 Error The clock margin of the system backplane failed. WBEM EventID: 4917. WBEM ProviderName: FPL_IndicationProvider 11481 Warning System backplane Hot Swap Oscillator (HSO) boards are NOT redundant. Probable Cause: HSO assembly has been removed or has a fault condition. Recommended Action: look for additional events describing action to take. WBEM EventID: 5231. WBEM ProviderName: FPL_IndicationProvider 11482 Error System backplane Hot Swap Oscillator (HSO) boards are insufficient. Probable Cause: There are no HSO present or all clock sources have faulted. Recommended Action: Look for additional events describing action to take. WBEM EventID: 4918. WBEM ProviderName: FPL_IndicationProvider 11483 Warning Failure reading Redundant Clock Source (RCS) or Hot Swap Oscillator HSO boards EEPROM. Probable Cause: device is not accessible over i2c Recommended Action: check HSO + RCS boards WBEM EventID: 4919. WBEM ProviderName: FPL_IndicationProvider 11484 Error Failure writing Redundant Clock Source (RCS) or Hot Swap Oscillator HSO boards EEPROM. Probable Cause: device is not accessible over i2c. Recommended Action: check HSO and RCS boards WBEM EventID: 4920. WBEM ProviderName: FPL_IndicationProvider 11485 Error Failure reading the Reset and Power Monitors (RPM) EEPROM. Probable Cause: device is not accessible over i2c. Recommended Action: check backplane power. WBEM EventID: 4921. WBEM ProviderName: FPL_IndicationProvider 11486 Error Failure writing the Reset and Power Monitors (RPM) EEPROM. Probable Cause: device is not accessible over i2c. Recommended Action: check backplane power WBEM EventID: 4922. WBEM ProviderName: FPL_IndicationProvider 11487 Error Failure reading the Onboard System Programmers (OSP) EEPROM. Probable Cause: device is not accessible over i2c. Recommended Action: check backplane power. WBEM EventID: 4923. WBEM ProviderName: FPL_IndicationProvider 11488 Error Failure writing the Onboard System Programmers (OSP) EEPROM. Probable Cause: device is not accessible over i2c. Recommended Action: check backplane power WBEM EventID: 4924. WBEM ProviderName: FPL_IndicationProvider 11489 Error SBS fault on startup. Probable Cause: SBS block for one of the MOAB's has reported an error on startup. Recommended Action: check backplane power. The physical location of the MOAB reporting the error is provided by data field. 0xFFFFXXFFFFFFFFFF where XX is: XX = 0x00 - Moab 0x00 XX = 0x01 - Moab 0x01 XX = 0x02 - Moab 0x02 XX = 0x10 - Moab 0x40 XX = 0x11 - Moab 0x41 XX = 0x12 Moab 0x42 WBEM EventID: 4925. WBEM ProviderName: FPL_IndicationProvider 11495 Warning Failure reading IO backplane LPM. Probable Cause: IO backplane LPM is not accessible over i2c. Recommended Action: Check power status of IO backplane. WBEM EventID: 4926. WBEM ProviderName: FPL_IndicationProvider 11496 Warning Failure writing IO backplane LPM. Probable Cause: IO Backplane LPM is not accessible over i2c. Recommended Action: Check power status of IO backplane. WBEM EventID: 4927. WBEM ProviderName: FPL_IndicationProvider Platform Events 87

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
Event Description
Event Severity
Event ID
Clock fault for clocks supplied from the Hot Swap Oscillator (HSO) board to the
system backplane. HSO has reported a fault or has been removed. The data field
contains the physical location of the HSO. Probable Cause: HSO assembly has reported
a fault or has been removed. Recommended Action: Check HSO assembly. WBEM
EventID: 4915. WBEM ProviderName: FPL_IndicationProvider
Error
11471
The operational clock frequencies do not match between the Redundant Clock Source
(RCS) and the Hot Swap Oscillator (HSO). The data field contains the physical location
of the HSO. Probable Cause: Operating frequency of the HSO does not match that
of the RCS. Recommended Action: Check HSO assembly. WBEM EventID: 4916.
WBEM ProviderName: FPL_IndicationProvider
Warning
11478
The clock margin of the system backplane failed. WBEM EventID: 4917. WBEM
ProviderName: FPL_IndicationProvider
Error
11479
System backplane Hot Swap Oscillator (HSO) boards are NOT redundant. Probable
Cause: HSO assembly has been removed or has a fault condition. Recommended
Action: look for additional events describing action to take. WBEM EventID: 5231.
WBEM ProviderName: FPL_IndicationProvider
Warning
11481
System backplane Hot Swap Oscillator (HSO) boards are insufficient. Probable Cause:
There are no HSO present or all clock sources have faulted. Recommended Action:
Look for additional events describing action to take. WBEM EventID: 4918. WBEM
ProviderName: FPL_IndicationProvider
Error
11482
Failure reading Redundant Clock Source (RCS) or Hot Swap Oscillator HSO boards
EEPROM. Probable Cause: device is not accessible over i2c Recommended Action:
check HSO + RCS boards WBEM EventID: 4919. WBEM ProviderName:
FPL_IndicationProvider
Warning
11483
Failure writing Redundant Clock Source (RCS) or Hot Swap Oscillator HSO boards
EEPROM. Probable Cause: device is not accessible over i2c. Recommended Action:
check HSO and RCS boards WBEM EventID: 4920. WBEM ProviderName:
FPL_IndicationProvider
Error
11484
Failure reading the Reset and Power Monitors (RPM) EEPROM. Probable Cause:
device is not accessible over i2c. Recommended Action: check backplane power.
WBEM EventID: 4921. WBEM ProviderName: FPL_IndicationProvider
Error
11485
Failure writing the Reset and Power Monitors (RPM) EEPROM. Probable Cause:
device is not accessible over i2c. Recommended Action: check backplane power
WBEM EventID: 4922. WBEM ProviderName: FPL_IndicationProvider
Error
11486
Failure reading the Onboard System Programmers (OSP) EEPROM. Probable Cause:
device is not accessible over i2c. Recommended Action: check backplane power.
WBEM EventID: 4923. WBEM ProviderName: FPL_IndicationProvider
Error
11487
Failure writing the Onboard System Programmers (OSP) EEPROM. Probable Cause:
device is not accessible over i2c. Recommended Action: check backplane power
WBEM EventID: 4924. WBEM ProviderName: FPL_IndicationProvider
Error
11488
SBS fault on startup. Probable Cause: SBS block for one of the MOAB's has reported
an error on startup. Recommended Action: check backplane power. The physical
location of the MOAB reporting the error is provided by data field.
0xFFFFXXFFFFFFFFFF where XX is: XX = 0x00 - Moab 0x00 XX = 0x01 - Moab 0x01
XX = 0x02 - Moab 0x02 XX = 0x10 - Moab 0x40 XX = 0x11 - Moab 0x41 XX = 0x12 -
Moab 0x42 WBEM EventID: 4925. WBEM ProviderName: FPL_IndicationProvider
Error
11489
Failure reading IO backplane LPM. Probable Cause: IO backplane LPM is not
accessible over i2c. Recommended Action: Check power status of IO backplane.
WBEM EventID: 4926. WBEM ProviderName: FPL_IndicationProvider
Warning
11495
Failure writing IO backplane LPM. Probable Cause: IO Backplane LPM is not
accessible over i2c. Recommended Action: Check power status of IO backplane.
WBEM EventID: 4927. WBEM ProviderName: FPL_IndicationProvider
Warning
11496
Platform Events
87