HP Integrity rx8620 HP Insight Manager WBEM Provider Events Reference - Page 73
your HP Support Representative to analyze the fabric WBEM EventID: 2920. WBEM
View all HP Integrity rx8620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Event ID Event Severity Event Description 10209 Warning fabric API is about to open the a link going out of the local cell. Probable Cause: An error prevented the use of a fabric link. Recommended Action: Collect IPMI event logs for more information regarding the failure. Contact your HP Support Representative to investigate the fabric subsystem. WBEM EventID: 2914. WBEM ProviderName: FPL_IndicationProvider 10272 Error An Arches fabric CSR read was unsuccessful because of a timeout. Probable Cause: An error occurred while reading a hardware register. Other events should detail the error. Recommended Action: Contact your HP Support Representative to investigate the fabric and firmware vertex modules. WBEM EventID: 2908. WBEM ProviderName: FPL_IndicationProvider 10273 Error An Arches fabric CSR write was unsuccessful. Probable Cause: An error occurred while writing a hardware register. Other events should detail the error. Recommended Action: Contact your HP Support Representative to investigate the fabric and firmware vertex modules. WBEM EventID: 2909. WBEM ProviderName: FPL_IndicationProvider 10343 Error The event data details the error that was encountered. Probable Cause: A fabric error occurred while preparing for rendezvous Recommended Action: Contact your HP Support Representative to investigate the fabric and firmware vertex modules. WBEM EventID: 2910. WBEM ProviderName: FPL_IndicationProvider 10351 Error The maximum memory supported by this system has been exceeded. Probable Cause: Too much memory has been installed in the system. Recommended Action: Remove DIMMs to get the total memory size below the amount of memory returned in the data field WBEM EventID: 2911. WBEM ProviderName: FPL_IndicationProvider 10357 Warning Failed to delete a bad port while routing the fabric. Data field indicates return status. Probable Cause: Experienced an error while routing the fabric. Recommended Action: Contact your HP Support Representative to investigate the fabric and firmware vertex modules. WBEM EventID: 4848. WBEM ProviderName: FPL_IndicationProvider 10358 Warning Failed to delete an edge that was found to be bad during routing. Probable Cause: Experienced an error while routing the fabric. Recommended Action: Contact your HP Support Representative to investigate the fabric and firmware vertex modules. WBEM EventID: 4849. WBEM ProviderName: FPL_IndicationProvider 10361 Error A command to the memory buffer chip failed to complete. Probable Cause: System firmware did not get a completion status from a command to a memory buffer chip. Recommended Action: Contact HP support. WBEM EventID: 2917. WBEM ProviderName: FPL_IndicationProvider 10375 Warning The Arches Fabric function ArfIsCsrRouteTraversable was called for a back-to-back system. This is unsupported, ArfIsCsrRouteTraversable should only be called for systems with crossbars. No data. Probable Cause: An unsupported fabric call was made. Recommended Action: Contact your HP Support Representative to investigate the fabric and firmware vertex modules. WBEM EventID: 2918. WBEM ProviderName: FPL_IndicationProvider 10376 Warning An invalid port number was given as an input to an Arches Fabric Traversability function. The port is expected to be an internal XBC num (8-15), but the actual port was not. Data field: (XBC number 32) | (port number 48). Probable Cause: Internal firmware error. Recommended Action: Contact your HP Support Representative to investigate the fabric and firmware vertex modules. WBEM EventID: 2919. WBEM ProviderName: FPL_IndicationProvider 10377 Warning Unable to read XBC port neighbor information. Data field: (xbcNum 32) | (portNum 48). Probable Cause: System firmware was unable to read a fabric hardware register. Recommended Action: Capture IPMI event logs, look for additional errors. Contact your HP Support Representative to analyze the fabric WBEM EventID: 2920. WBEM ProviderName: FPL_IndicationProvider Platform Events 73