HP Integrity rx8620 Installation Guide, Sixth Edition - HP Integrity rx8620 Se - Page 10
Overview, The HP Integrity rx8620 Servers are 17U
View all HP Integrity rx8620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Introduction Overview Overview The HP Integrity rx8620 Servers are 17U1 high, 16-socket symmetric multiprocessor (SMP) rack-mount or stand-alone servers that accommodate up to 128GB of memory, PCI-X I/O, and internal peripherals including disks and DVD or tape drives. High-availability features include N+1 hot-swap fans and power, redundant power cords, and hot-plug PCI cards and hard disk drives. Features of the server include: • Up to 128GB of physical memory provided by dual in-line memory modules (DIMMs). • Up to 32 processors with a maximum of four processor modules per cell board and a maximum of four cell boards. • One cell controller (CC) per cell board. • All CPUs and cell controllers on the cell boards are cooled with turbo cooler fans. • Four embedded hard disk drives. Available sizes are 36GB, 73GB, and 146GB drives. • Two internal DVD drives or one DVD drive and one 40GB DDS-4 DAT drive. • Nine front chassis mounted N+1 fans. • Twelve rear chassis mounted N+1 fans. • Six N+1 PCI-X card cage fans. • Six N+1 bulk power supplies. • Two PCI power supplies. • Sixteen PCI-X slots divided into two partitions. Each partition can accommodate up to eight PCI cards. • Two core I/O cards. 1. The U is a unit of measurement specifying product height. 1 U is equal to 1.75 inches. 10 Chapter 1