HP Integrity rx8620 Installation Guide, Sixth Edition - HP Integrity rx8620 Se - Page 64
Positioning DVD+RW drive in media bay, Step 8.
View all HP Integrity rx8620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Installation Installing Accessories Step 8. Slide the DVD+RW drive and cable into the removable media drive bay. Push the drive until it is fully seated in the bay. Figure 2-20 Positioning DVD+RW drive in media bay Step 9. Replace the front bezel and top cover. See "Replacing the Front Bezel" and "Replacing the Top Cover" in the Remove and Replace Procedures in the HP Service Guide. Step 10. Power on the server. Step 11. Boot the operating system. See "Powering On the System" in the Remove and Replace Procedures in the HP Service Guide. Step 12. Install the appropriate device drivers. Use the installation instructions that come packaged with the drive to install device drivers. 64 Chapter 2
Chapter 2
Installation
Installing Accessories
64
Step 8.
Slide the DVD+RW drive and cable into the removable media drive bay. Push the drive until it is
fully seated in the bay.
Figure 2-20 Positioning DVD+RW drive in media bay
Step 9.
Replace the front bezel and top cover. See “Replacing the Front Bezel” and “Replacing the Top
Cover” in the Remove and Replace Procedures in the HP Service Guide.
Step 10.
Power on the server.
Step 11.
Boot the operating system. See “Powering On the System” in the Remove and Replace Procedures
in the HP Service Guide.
Step 12.
Install the appropriate device drivers. Use the installation instructions that come packaged with
the drive to install device drivers.