HP Surestore 80fx Optical Drive and Library SCSI-2 Command Reference - Page 170
code will be set to BLANK CHECK/Overwrite Attempted.
View all HP Surestore 80fx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
SCSI-2 Drive Commands NOTE NOTE SCSI-2 Drive Command Set Write (Group 5) Command (AAH) When this command is used with 14X 512 OR 1024 byte/sector media, setting the ErsCntl bit or the PBA bit will cause the drive to return a CHECK CONDITION status. The sense key/additional sense code will be set to ILLEGAL REQUEST/INVALID FIELD in CDB. For write-once optical disks, blank checking is performed before writing data. If a written block is detected during blank checking, the drive will return a CHECK CONDITION status. The sense key/additional sense code will be set to BLANK CHECK/Overwrite Attempted. Chapter 2 2-133
SCSI-2 Drive Command Set
Write (Group 5) Command (AAH)
Chapter 2
2-133
SCSI-2 Drive Commands
NOTE
When this command is used with 14X 512 OR 1024 byte/sector media,
setting the ErsCntl bit or the PBA bit will cause the drive to return a
CHECK CONDITION status. The sense key/additional sense code will be
set to ILLEGAL REQUEST/INVALID FIELD in CDB.
NOTE
For write-once optical disks, blank checking is performed before writing
data. If a written block is detected during blank checking, the drive will
return a CHECK CONDITION status. The sense key/additional sense
code will be set to BLANK CHECK/Overwrite Attempted.