Home » HP Manuals » Storage Devices » HP Surestore 80fx » Manual Viewer

HP Surestore 80fx Optical Drive and Library SCSI-2 Command Reference - Page 277

Release wait of DSP I/F task, Command Parameter Length contradiction to DSP

Get HP Surestore 80fx - Optical Jukebox PDF manuals and user guides

Add to My Manuals
Save this manual to your list of manuals

Page 277 highlights

Drive Error Codes Internal Error Codes Table A-3 Internal Error Codes Error Code (hex.) Message 078DXXXX VFO Offset Calibration failed 078EXXXX ID VGA Calibration failed 078FXXXX MO VGA Calibration failed 0791XXXX Focus bias calibration failed 07B4XXXX Read power calibration failed 0957XXXX Power-on diagnostic time out 0959XXXX ROM Checksum Error 095AXXXX Illegal request for DSP Interface task 095FXXXX Command Parameter Length contradiction to DSP 0961XXXX Release wait of DSP I/F task 0965XXXX ODC command was aborted 0968XXXX Illegal request to Read/Write task 096EXXXX Parameter Block data is invalid 0A4FXXXX 12V line is not supplied 0A71XXXX RAM Test Error 0A72XXXX ODC Test Error 0E03XXXX Failed updating the flash ROM 0E05XXXX Failure when updating the Parameter Block 0E56XXXX Parameter Block Error A-14 Appendix A

Section	Page
Optical Drive and Library SCSI-2 Command Reference	1
1 SCSI Command Overview	20
Optical Drive Control Through SCSI	21
Drive Control Commands	22
SCSI Commands Used by the Target	37
2 SCSI-2 Drive Command Set	38
Numerical List of Commands	39
Flag, Link, and RelAdr	44
Test Unit Ready Command (00H)	45
Rezero Unit Command (01H)	46
Request Sense Command (03H)	47
Format Unit Command (04H)	52
Reassign Blocks Command (07H)	56
Read (Group 0) Command (08H)	58
Write (Group 0) Command (0AH)	60
Seek (Group 0) Command (0BH)	62
Inquiry Command (12H)	63
Mode Select Command (15H)	68
Reserve Command (16H)	89
Release Command (17H)	90
Mode Sense (Group 0) Command (1AH)	91
Start/Stop Unit Command (1BH)	110
Receive Diagnostic Results Command (1CH)	111
Send Diagnostic Command (1DH)	113
Prevent/Allow Medium Removal Command (1EH)	116
Read Capacity Command (25H)	117
Read (Group 1) Command (28H)	119
Write (Group 1) Command (2AH)	121
Seek (Group 1) Command (2BH)	124
Erase (Group 1) Command (2CH)	125
Write and Verify (Group 1) Command (2EH)	127
Verify (Group 1) Command (2FH)	129
Pre-Fetch (34H)	131
Synchronize Cache (35H)	132
Read Defect Data (Group 1) Command (37H)	133
Write Buffer Command (3BH)	136
Read Buffer Command (3CH)	139
Read Long Command (3EH)	141
Write Long Command (3FH)	143
Log Select Command (4CH)	146
Log Sense Command (4DH)	148
Mode Select (Group 2) Command (55H)	159
Mode Sense (Group 2) Command (5AH)	162
Read (Group 5) Command (A8H)	165
Write (Group 5) Command (AAH)	168
Erase (Group 5) Command (ACH)	171
Write and Verify (Group 5) Command (AEH)	174
Verify (Group 5) Command (AFH)	177
Read Defect Data (Group 5) Command (B7H)	179
Read Long Command (DEH)	182
Write Long Command (DFH)	184
3 Jukebox SCSI-2 Command Set	188
Numerical List of Commands	189
Alphabetical List of Commands	191
Test Unit Ready Command (00H)	193
Rezero Unit Command (01H)	194
Request Sense Command (03H)	195
Initialize Element Status Command (07H)	199
Rotate Mailslot Command (0CH)	200
Inquiry Command (12H)	201
Reserve Command (16H)	205
Release Command (17H)	207
Mode Sense Command (1AH)	208
Receive Diagnostic Results Command (1CH)	220
Send Diagnostic Command (1DH)	222
Prevent/Allow Medium Removal Command (1EH)	224
Position To Element Command (2BH)	225
Write Buffer Command (3BH)	226
Read Buffer Command (3CH)	230
Log Sense Command (4DH)	234
Move Medium Command (A5H)	251
Exchange Medium Command (A6H)	253
Read Element Status Command (B8H)	255
A Drive Error Codes	264
Chapter Overview	265
Drive Request Sense Command Values	266
Internal Error Codes	272
DSP Error Codes	282
B Autochanger Error Codes	288
Chapter Overview	289
Request Sense Error Codes	290
Additional Sense Data Format for Error Recovery	295
Hardware Error Codes	306
Autochanger Move Error Codes	316
Jukebox Micro-Move Error Codes	319
C Field Replaceable Units (FRUs)	340
D Micro/Macro-Moves	346