HP Surestore 80fx Optical Drive and Library SCSI-2 Command Reference - Page 290

Autochanger Error Codes Autochanger Error Codes Request Sense Error Codes Table B-1 Request Sense Error Codes This section identifies each of the error responses for the autochanger "Request Sense Command (03H)", Table 3-5 on page 3-8. Request Sense - Sense Key Values - Byte 2, Bits 3 through 0 Sense Name Key Abbrev. Description 0H No Sense NS 1H Recovered RE Error 2H Not Ready NR 3H Medium Error ME 4H Hardware HE Error 5H Illegal Request IR 6H Unit Attention UA The command completed successfully. The last command was completed successfully with some recovery action performed by the autochanger/controller. The autochanger cannot be accessed. The command terminated with an unrecovered error condition that was caused by a optical disk defect. The autochanger/controller detected a hardware error. There was an illegal parameter in the command descriptor block or in the additional parameters supplied for some commands. The optical disk has been loaded, the unit has been reset, or the Mode Select parameters have been changed. Appendix B B-3