HP Surestore 80fx Optical Drive and Library SCSI-2 Command Reference - Page 220

Jukebox SCSI-2 Commands Jukebox SCSI-2 Command Set Receive Diagnostic Results Command (1CH) NOTE Table 3-29 Receive Diagnostic Results Command (1CH) This command retrieves the results of a library diagnostic test performed using the Send Diagnostic Command (Table 3-31 on page 3-35). The diagnostic test number and parameters, error codes, and FRU information are provided. The following tables provide information that can help with troubleshooting failed components in a unit. The FRUs returned should be considered pointers to the best area within the unit to check for the fault. Simply changing the FRU listed may or may not fix the associated problem. Receive Diagnostic Results Command CDB Byte 7 6 5 4 3 2 1 0 0 Operation Code (1CH) 1 Logical Unit Number (0) Reserved (0) 2 Reserved (0) 3 Allocation Length (MSByte) 4 Allocation Length (LSByte) 5 Control Byte (0) Allocation Length The maximum number of parameter bytes that may be sent in the Data In Phase to describe the results of the test. Chapter 3 3-33