HP Surestore 80fx Optical Drive and Library SCSI-2 Command Reference - Page 316

Autochanger Error Codes Autochanger Move Error Codes Autochanger Error Codes NOTE Table B-9 Autochanger Move Error Codes These error codes ONLY apply to the model 40fx, 80ex, 125ex, and 220mx jukeboxes. Move Errors are reported through byte 18 of the Additional Sense Bytes Request Sense Command (03H) in Table 5-6 on page 5-14. Autochanger Move Error Codes Error Code Failure Description (hex.) 00 Failure occurred before any servo-controlled motions were attempted during Poweron Selftest. 02 Failure while Picker is not moving. 04 Failure while moving the Carriage/Picker assembly away from drives. 06 Failure while moving the Carriage/Picker assembly toward drives. 08 Failure while flipping the Picker. 0A Failure while translating the Picker assembly. 0E Failure while moving the Picker fingers back in preparation to translate. 10 Failure while moving the Picker fingers to engage the cartridge from the source storage element. 12 Failure while moving the Picker fingers back to remove the cartridge from the source storage element. 18 Failure while moving the Picker fingers forwards to insert a cartridge in the destination storage element. 1A Failure while moving the Picker fingers back after inserting a cartridge in the destination storage slot. Appendix B B-29