HP Surestore 80fx Optical Drive and Library SCSI-2 Command Reference - Page 334

Autochanger Error Codes Autochanger Error Codes Jukebox Micro-Move Error Codes Table B-13 Sequence Tests (For models 40fx, 80ex, 125ex, and 220mx ONLY) No. Test Name Description 16 Drive I/O Test Performs a combination of moves with a pass/fail result. It moves a cartridge from a randomlychosen full slot to a drive, with a random flip. It then moves the cartridge back to its original slot with its original orientation. It does this once for each optical drive. Returns an error code #57H Invalid Configuration if there are no cartridges loaded into the unit. Requires one loaded cartridge; drives must be empty. 17 Mailslot I/O Performs a combination of moves with a pass/fail result. It moves a cartridge from the lowestnumbered full slot to the mailslot with a random flip. It then moves the cartridge back to its original slot with its original orientation. Returns an error code #57H Invalid Configuration if there are no cartridges loaded into the unit. Requires one loaded cartridge; mailslot must be empty. 18 Speed Factor Setting Allows the setting of the speed factor as the first Utility parameter given. The speed factor determines how fast the system moves the mechanics. The number provides 1/Parameter speed (e.g. Parameter=3 runs the motors at 1/3 of full speed). This test can only be run from the SCSI Interface. 19 Zero Maximum Force The maximum force log is initialized to all zeros. Log 20 Set Speed Factor to Allows the mechanics to be run at full speed. Full Speed 21 Set Speed Factor to Allows the mechanics to be run at half speed. Half Speed 22 Set Speed Factor to Allows the mechanics to be run at quarter speed. Quarter Speed Appendix B B-47