HP Surestore 80fx Optical Drive and Library SCSI-2 Command Reference - Page 95

SCSI-2 Drive Command Set Mode Sense (Group 0) Command (1AH) RC PER DTE DCR A Read Continuous bit of 1 indicates that error correction codes are not used for data error recovery. A Read Continuous bit of 0 allows the use of error correction codes for data recovery. A Post Error bit of 1 indicates that the target reports recovered errors. A PER bit of 0 indicates that the target does not report recovered errors. A Disable Transfer on Error (DTE) bit of 1 indicates that the target terminates the data phase upon detection of a recovered error. DTE bit of 0 indicates that the target does not terminate the data phase upon detection of a recovered error. A Disable Correction bit of 1 indicates that error correction codes are not used for data error recovery. A DCR bit of 0 allows the use of error correction codes for data error recovery. Read Retry Count Write Retry Count The read retry count field specifies the number of times the target attempts recovery of a read operation before reporting an error. The write retry count field specifies the number of times the target attempts recovery of a write operation before reporting an error. 2-58 Chapter 2