HP Surestore 80fx Optical Drive and Library SCSI-2 Command Reference - Page 360

Table D-1 Micro/Macro-Moves HP Surestore Optical Micro-Move IDs HP Surestore Optical Micro-Move ID Table (For all models, EXCEPT 40fx, 80ex, 125ex and 220mx) Move ID Description (hex.) DA Move picker plunge assembly to a position where the mailslot rotation actuator can be engaged to rotate the mailslot out. Used when the state of the mailslot is unknown and must be placed in a known state. DB Retract the picker plunge assembly a short distance to clear the thumbs away from the mailslot after rotating the mailslot out. The following move IDs are only for 80fx, 160fx, 200fx, 160ex, 320ex, 400ex, 300mx, 600mx, and 700mx model jukeboxes. DC Slow retract of the picker plunge assembly, pulling the mailslot in. Checks that the cartridge is in properly. First move of a rotate in. DD Retract thumbs back into the picker after rotating the mailslot out. DE Plunge rotate mailslot 3 (not used). DF Plunge rotate mailslot 4 (not used). E0 Plunge rotate mailslot 5 (not used). E1 First of two moves rotating the mailslot in. Quickly retract the picker plunge assembly, pulling the mailslot most of the way in. Followed by micro-move E3. E2 Plunge out to rotate the mailslot almost all the way out. E3 Short retraction of the picker plunge assembly until pressure is felt. Used at end of rotating the mailslot in and ensures that the mailslot has been rotated fully in. E4 Short plunge out to relieve the pressure after rotating the mailslot in. E5 Short plunge out, feeling for pressure, to ensure that the mailslot is rotated all the way out. Appendix D D-15 Micro/Macro-Moves