Hitachi CMP420V1 Owners Guide - Page 44

OPERATING INSTRUCTIONS (continued) SETUP MENU (continued) Selected characters Audio Input AV1 AV2 AV3 AV4 Scart Output RGB1 RGB2 (1st step) RGB2 (2nd step) Stereo L/Mono Setup hint This should correspond to the audio signal from the equipment that is connected to AV1 audio input terminal. If it is monaural audio, set this to L/Mono. (Same to AV1) DVI-PC DVI-STB RGB Component Auto HDTV SDTV/DVD Not Available (grayed out) This should correspond to the signal mode of the signal from the equipment that is connected to RGB1 DVI terminal. This should correspond to the signal mode of the signal from the equipment that is connected to RGB2 D-sub terminal. This step should be set only when [Component] is selected on the 1st step. This should correspond to the signal mode of the signal from the equipment that is connected to RGB2 D-sub terminal. • Normally, set this to Auto. The signal mode of the input signal will be automatically recognized. • If the input signal contains much noise or has a low level at Auto and the operation is found erratic, set this to match the input signal. OTHER FEATURES Automatic Store Approximately 1 sec. after adjustment is completed, the adjustments will be recorded as shown in the table below. Menu Picture Display Registration condition Picture Mode 1 setting is registered. Contrast Brightness Color For every input function and every Picture Mode, 1 setting is registered. Sharpness Tint Color Temperature Contrast Mode YNR CNR Film Mode PAL Comb Filter LTI CTI Black Enhancement Auto Color Color Temp. Adjust R Amplitude For every Color Temperature, 1 G Amplitude setting is registered. B Amplitude R Cut Off G Cut Off B Cut Off For every input function and every Color Management Picture Mode, 1 setting is registered. Magenta 1 setting is registered. Red Menu Picture Function Setup Display Registration condition Yellow 1 setting is registered. Green Cyan Blue Color Decoding - Red For every Color Temperature, 1 Green setting is registered. Color For every input function and every Picture Mode, 1 setting is Tint registered. Video Power Save 1 setting is registered. System 1 setting is registered. Color System 1 setting is registered. AV1 AV2 AV3 AV4 Video Input - AV1 1 setting is registered. AV2 AV4 Audio Input - AV1 1 setting is registered. AV2 AV3 AV4 RGB1 RGB2 • The previously recorded items will be lost.