Intel D845PEBT2 Product Specification - Page 70
Front Panel Connector
View all Intel D845PEBT2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Intel Desktop Board D845PEBT2 Technical Product Specification 2.8.3.1 Front Panel Connector This section describes the functions of the front panel connector. Table 48 lists the signal names of the front panel connector. Table 48. Front Panel Connector Pin Signal In/Out Description Pin Hard Drive Activity LED 1 HD_PWR Out Hard disk LED pull-up 2 (330 Ω) to +5 V 3 HAD# Out Hard disk active LED 4 Reset Switch 5 Ground Ground 6 7 FP_RESET# In Reset switch 8 Power 9 +5 V Power 10 Signal In/Out Description Power LED HDR_BLNK_ Out GRN Front panel green LED HDR_BLNK_ Out YEL Front panel yellow LED On/Off Switch FPBUT_IN In Power switch Ground Ground Not Connected N/C Not connected N/C 9 +5 V DC 87 Power Reset Switch Switch 65 43 Power Hard Drive LED Activity LED 2 1 OM15075 Figure 16. Front Panel Connector Pins 2.8.3.1.1 SCSI Hard Drive Activity LED Connector Pins 1 and 3 can be connected to an LED to provide a visual indicator that data is being read from or written to a hard drive. Proper LED function requires one of the following: • An SATA hard drive connected to an onboard SATA connector • An IDE hard drive connected to an onboard IDE connector • A add-in hard drive connected to the SCSI hard drive activity LED connector For information about The SCSI hard drive activity LED connector Refer to Section 1.7.3.2, page 26 70