JVC GY-DV500U GY-DV500 User Manual - PDF (4,089KB) - Page 52
VCR Save Mode, If Unit is Left in Record-Pause Standby Mode
View all JVC GY-DV500U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
7. SHOOTING OPERATION 7-2 VCR Save Mode FILTER 1 3200k 2 5600k 3 5600k+ND SHUTTER STATUS MENU ALARM MONITOR AUTO IRIS FULL AUTO BLACK BACK L NORMAL SPOT L STRETCH NORMAL COMPRESS LOLUX PRST A B AUTO OKFNFEE BARS CAM ON HML SAVE STBY VTR GAIN OUTPUT WHT.BAL NG POWER ON OFF OPERATE/WARNING RESET MONITOR SELECT CH-1 AUDIO CH-2 LEVEL LIGHT ON OFF COUNTER CTL TC UB PRST A B ON KNEE BARS CAM HML VTR switch SAVE STBY VTR GAIN OUTPUT WHT.BAL NG POWER ON OFF OFF AUTO VCR operation status display STBY or SAVE F5 . 6 STBY Viewfinder ACCU - FOCUS G F CH1 CH2 < 60 I SD B M 09 9 1 2 . 4V (Status 1 mode) When a recordable videocassette is loaded, the GY-DV500 enters the record-pause mode. However, the record-pause operation condition differs depending on the setting of the VTR switch. ● VTR switch setting STBY : The GY-DV500 enters the record-pause mode, and the drum is rotating at this time. (Standby mode) The "STBY" indicator appears in the VCR operation status display in the viewfinder (in Status 1 mode). • In this condition, recording starts immediately when the VTR trigger button is pressed. SAVE : The GY-DV500 enters the record-pause mode but the drum is not rotating. (Save mode). The tape is protected. The "SAVE" indicator appears in the viewfinder (in Status 1 mode). The OPERATE indicator lights orange. The display backlight turns off. Note: When the VCR Setup Menu item No. 396 SSF MODE is set to the CUE MODE or MARK mode, the VCR save mode is not entered. Recording from the Save mode ● In the save mode, pressing the VTR trigger button will start recording. However, in this case, it takes several seconds before the GY-DV500 starts recording. ● Pressing the VTR trigger button again interrupts the recording and the GY-DV500 enters the save mode again. 7-3 If Unit is Left in Record-Pause (Standby) Mode When the GY-DV500 has remained in record-pause (standby) mode for about 30 minutes, the unit enters the save mode, in which the drum rotation is stopped automatically and the tape tension is released. (Save mode) Ⅲ To start recording from the save mode, press the VTR trigger button; the drum starts to rotate and recording starts in about 3 seconds. Ⅲ To return to the record-pause mode from the save mode, press the VTR trigger button TWICE; the drum starts to rotate. • The time until the unit enters the save mode after it is placed in record-pause mode can be set to 3 minutes or 30 minutes with the VCR Setup Menu item No. 307 LONG PAUSE TIME. When used in a cold environment, the setting will be 3 minutes regardless of the setting on the VCR Setup Menu. See page 69. 52