JVC GY-DV500U GY-DV500 User Manual - PDF (4,089KB) - Page 73

12-5 OPERATION Screen 12. SETUP MENU Item SHUTTER Function, Operation Variation Range Initial Setting The SHUTTER button on the right side section is used to select STEP for fixed shutter speed or V.SCAN variable scanning rate for shooting computer monitor screens. STEP Enables setting of different fixed shutter speeds. [1/100, 1/250, 1/500, 1/1000, 1/2000] VARIABLE ....... Selected when shooting computer monitor screens, etc. [Variable range: 60.1 to 2084.6 Hz] STEP VARIABLE STEP FAW Selects the W.BAL switch (@ on page 13) position to which the FAW (FullTime Auto White Balance Adjustment) function is to be assigned. NONE FAW function is not used. A FAW is assigned to the A position. B FAW is assigned to the B position. PRESET ......... FAW is assigned to the PRESET position. NONE A B PRESET NONE GAIN L GAIN M GAIN H Selects the gain value in each position of the GAIN switch (9 on page 13). -3dB 0dB 6dB 9dB 12dB 18dB ALC L: 0dB M: 9dB H: 18dB SMOOTH TRANS Smoothens the transition when the GAIN switch (9 on page 13), or WHT.BAL switch (@) is switched over and achieves gradual change in place of sudden change. However, the smooth transition function does not function when switching the GAIN switch set in ALC, FAS button and the LOLUX button. ON Activates the smooth transition function. OFF Deactivates the smooth transition function. ON OFF OFF PAGE BACK The CAMERA MENU returns when the SHUTTER dial is pressed with - - the cursor at this position. 73