JVC SR-V10U SR-V10U Instruction manual (1MB, PDF) - Page 29
Input receiving channel number, Check program date, Set tape speed, Return to normal screen, Engage
View all JVC SR-V10U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
4 Input receiving channel number The guide channel GUIDE CHANNEL SET number, which is assigned to the TV or GUIDE CH: 12 VCR CH : - - - cable station for the PlusCode number that you entered in step 3, will appear PRESS NUMBER KEY (0-9) OR (5,∞), THEN (OK) PRESS (PROG.) TO END automatically on the Guide Channel Set screen. Press the Number keys (or CH +/- or SHUTTLE PLUS %fi) to input the number of the channel on which the broadcast for the PlusCode number is received on the VCR, then press OK. ● The Guide Channel Set screen appears only when you input the PlusCode number of a station for which the guide channel number has not been set previously. ● If you receive your channels through a cable box, select the cable box output channel - the channel on which you view the cable box programs on the TV. 5 Check program date The PlusCode number you entered and the corresponding timer recording program is displayed on the Program screen. Check to make sure it is accurate. ● To change the stop PROGRAM 1 (PLUSCODE NO. 12345678) START STOP 8:00PM = 10:00PM DATE CH 12/24/00 12 SP SUN PRESS (8=DAILY, 9=WEEKLY STOP+/- = STOP TIME, SP/EP) PRESS (PROG.) TO END time, press STOP +/-. ● To timer-record daily (Sunday-Saturday) or weekly serials, press DAILY (number "8") or WEEKLY (number "9"). "DAILY" or "WEEKLY" appears on the Program screen. Pressing the button again makes each corresponding display disappear. ● If you made a mistake, press CANCEL to access the PlusCode No. screen again and input the correct PlusCode number. ● If an incorrect PlusCode number or the one for a broadcast already finished has been inputted, "ERROR" is displayed for about 5 seconds, then the PlusCode No. screen reappears. 6 Set tape speed Press SP/EP. EN 29 7 Return to normal screen Press PROG. or OK. "PROGRAM COMPLETED" appears on the screen for about 5 seconds, then normal screen appears. • If "PROGRAM NOT COMPLETED PROGRAM OVERLAP" appears, you have another program overlapping the program you have just made. The Program Check screen appears and conflicting programs will start blinking. You can now correct the conflicting programs. See "When programs overlap each other" on page 36. 8 Engage timer recording standby mode Press TIMER. The VCR turns off automatically and "‰" is displayed on the front display panel. To use the VCR while it is in timer recording standby mode Press TIMER to cancel the timer recording standby mode, then press POWER to turn on the VCR. DO NOT forget to put the VCR into timer recording standby mode again by pressing TIMER after you use the VCR; otherwise, you cannot record the broadcasts you want. ● When "AUTO TIMER" is set to "ON" (੬ pg. 37, 38) , the timer recording standby mode is automatically engaged when the VCR is turned off. It is temporarily canceled when the VCR is turned on. You do not have to press TIMER to engage or disengage the timer recording standby mode. IMPORTANT If you have moved to a different area or if a broadcasting station's channel number has been changed, the wrong VCR CH number will be displayed on the Program screen in step 5. When this happens, set the correct guide channel number for that station. (੬ pg. 30, "Changing VCR Plus+ Setting") NOTES: ● In case of a power failure after programming, the recorder's memory backup keeps your selections (if the lithium battery is not exhausted). ● To timer-record cable channels received through a cable box, be sure to keep the cable box turned on with the correct channel selected.