JVC SR-V10U SR-V10U Instruction manual (1MB, PDF) - Page 38

Other Useful Functions Cont.

Get JVC SR-V10U - S-vhs Hi-fi Stereo Videocassette Recorder PDF manuals and user guides View all JVC SR-V10U manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

38 EN OTHER USEFUL FUNCTIONS (cont.) Ⅵ VIDEO CALIBRATION ON OFF * The default setting is bold in the table below. When this function is set to "ON", this VCR checks the condition of the tape in use during playback and recording, and compensates to provide the highest-possible pictures. This takes place whenever you play back a tape or start recording after inserting a tape. NOTES: ● During playback, this function is always working even though "VIDEO CALIBRATION" appears just at the beginning of automatic tracking. ● During recording, this function works only for the first EP recording and the first SP recording on an inserted tape. For timer recording, this function checks the tape condition both for the SP recording and the EP recording before the first timer recording starts. ● When you play back rental tapes or tapes recorded on other VCRs, set this function either "ON" or "OFF" whichever gives you the best picture. Ⅵ PICTURE CONTROL AUTO (NORM): Normally select this. Picture quality is adjusted automatically. When "VIDEO CALIBRATION" is "OFF", "NORM" will appear instead of "AUTO". EDIT: Minimizes picture degradation during editing (recording and playback). SOFT: Reduces image coarseness when viewing overplayed tapes containing much noise. SHARP: Clearer, sharper-edged picture when viewing images with much flat, same-colored surfaces such as cartoons. This function helps you to adjust the playback picture quality according to your preference. NOTES: ● When you select "EDIT", "SOFT" or "SHARP", the selected mode will not change until you select again. ● Select "EDIT" when you are editing tapes (੬ pg. 45, 46, and 49). After you finish editing the tapes, select "AUTO" ("NORM" when "VIDEO CALIBRATION" is "OFF".) Ⅵ AUTO TIMER ON OFF ● When this function is set to "ON": The timer recording standby mode is automatically engaged when the VCR is turned off. It is temporarily canceled when the VCR is turned on. You do not have to press TIMER to engage or disengage the timer recording standby mode. ● When this function is set to "OFF": You have to press TIMER to engage or disengage the timer recording standby mode. Ⅵ ON SCREEN (REC) ON OFF When this function is set to "ON", all the indications displayed on screen will be recorded. If you do not want to record the indications, select "OFF". (੬ pg. 21) NOTE: ● The setting you have made is kept in memory. Even if the VCR is unplugged or the power failure occurs, it will resume every time you turn on the VCR. (੬ pg. 9) Refer to page 37 for setting procedures.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
38
EN
OTHER USEFUL FUNCTIONS (cont.)
* The default setting is
bold
in the table below.
When this function is set to “ON”, this VCR checks the condition of the
tape in use during playback and recording, and compensates to provide
the highest-possible pictures. This takes place whenever you play back a
tape or start recording after inserting a tape.
NOTES:
●
During playback, this function is always working even though “VIDEO
CALIBRATION” appears just at the beginning of automatic tracking.
●
During recording, this function works only for the first EP recording and the first
SP recording on an inserted tape.
For timer recording, this function checks the tape condition both for the SP
recording and the EP recording before the first timer recording starts.
●
When you play back rental tapes or tapes recorded on other VCRs, set this
function either “ON” or “OFF” whichever gives you the best picture.
This function helps you to adjust the playback picture quality according
to your preference.
NOTES:
●
When you select “EDIT”, “SOFT” or “SHARP”, the selected mode will not
change until you select again.
●
Select "EDIT" when you are editing tapes (
Z
pg. 45, 46, and 49). After you
finish editing the tapes, select “AUTO” (“NORM” when “VIDEO
CALIBRATION” is “OFF”.)
●
When this function is set to “ON”:
The timer recording standby mode is automatically engaged when the
VCR is turned off. It is temporarily canceled when the VCR is turned
on. You do not have to press
TIMER
to engage or disengage the timer
recording standby mode.
●
When this function is set to “OFF”:
You have to press
TIMER
to engage or disengage the timer recording
standby mode.
When this function is set to “ON”, all the indications displayed on
screen will be recorded. If you do not want to record the indications,
select “OFF”. (
Z
pg. 21)
NOTE:
●
The setting you have made is kept in memory. Even if the VCR is unplugged or
the power failure occurs, it will resume every time you turn on the VCR. (
Z
pg.
9)
m
PICTURE CONTROL
AUTO
(NORM):
Normally select
this. Picture quality is
adjusted automatically.
When “VIDEO
CALIBRATION” is “OFF”,
“NORM” will appear instead
of “AUTO”.
EDIT:
Minimizes picture
degradation during editing
(recording and playback).
SOFT:
Reduces image
coarseness when viewing
overplayed tapes
containing much noise.
SHARP: Clearer, sharper-edged
picture when viewing
images with much flat,
same-colored surfaces
such as cartoons.
m
VIDEO CALIBRATION
ON
OFF
m
AUTO TIMER
ON
OFF
Refer to page 37 for setting procedures.
m
ON SCREEN (REC)
ON
OFF