Konica Minolta bizhub 283 bizhub 423/363/283/223 Print Operations User Guide - Page 149
Parameter details, Finisher FS-527, Punch Kit, Saddle Stitcher, of multiple s.
View all Konica Minolta bizhub 283 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
11.3 Parameter details 11 Reference - The [Staple:] function is available only if the optional Finisher FS-527 or Finisher FS-529 is installed. - The [Punch:] function is available only when the Punch Kit is installed on the optional Finisher FS-527. - The [Fold:] function is available only when the Saddle Stitcher is installed on the optional Finisher FS527. - If multiple pages are printed while [Half-Fold] is specified for the [Fold:] function, the finishing unit varies depending on the setting of [Half-Fold Specification] in [Copier Settings] of [User Settings] on the control panel. If [Half-Fold Specification] is set to [One Sheet at a Time], paper is folded by sheet. If it is set to [Multiple Sheets], all sheets are folded collectively for each job even if the original consists of multiple pages. However, if the number of original pages is greater than the number of sheets this machine can fold, the setting of the [Fold:] function is disabled automatically, and sheets are not folded for printing. If [Half-Fold] is selected along with [Booklet], all sheets are half-folded collectively even if [One Sheet at a Time] is specified. For details, refer to page 13-34. bizhub 423/363/283/223 11-8