LG 50PJ340 Training Manual - Page 80
VZB (Z-Bias) VR201 Adjustment, VZB Z Bias, VR201
View all LG 50PJ340 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
VZB (Z-Bias) VR201 Adjustment Read the Voltage Label on the back top center of the panel when adjusting VR201. Bottom Left of Z-SUS Board VZB (Z Bias) + - VZB (Z-Bias) TP VZB (Z Bias) VR201 Set should run for 15 minutes, this is the "Heat Run" mode. Set screen to "White Wash" mode or 100 IRE White input. All SMPS adjustments should have been completed. 1. Place DC Volt meter between VZB TPs. 2. Adjust VZB (Z Bias) VR201 in accordance with your Panel's voltage label. 80 July 2010 50PJ350 Plasma
80
July 2010
50PJ350
Plasma
VZB (Z
VZB (Z
-
Bias) VR201 Adjustment
Bias) VR201 Adjustment
Read the Voltage Label on the back top center
of the panel when adjusting VR201.
Set should run for 15 minutes, this is the “Heat Run” mode.
Set screen to “White Wash” mode or 100 IRE White input.
All SMPS adjustments should have been completed.
1.
Place DC Volt meter between VZB TPs.
2.
Adjust VZB (Z Bias) VR201 in accordance with your Panel’s voltage label.
VZB (Z Bias)
Bottom Left of Z-SUS Board
VZB (Z Bias)
VR201
VZB (Z-Bias) TP
+
-