LG 50PJ340 Training Manual - Page 81
Connector P2 to Y-SUS P211 Voltages and Diode Checks
View all LG 50PJ340 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Connector P2 to Y-SUS P211 Voltages and Diode Checks Voltage and Diode Mode Measurements P2 Location: Top Left There are no Stand-By voltages on this connector P2 "Z-SUS" to "Y-SUS" P211 Pin Label Run 1~2 Gnd Gnd 3 n/c n/c 4~5 +Vs *206V 6 n/c n/c 7~11 ER_COM 98V~102V Diode Check Gnd n/c Open n/c Open Pin 1 * Note: This voltage will vary in accordance with Panel Label Diode Mode Readings taken with all connectors Disconnected. DVM in Diode Mode. 81 July 2010 50PJ350 Plasma
81
July 2010
50PJ350
Plasma
Diode Mode Readings taken with all connectors Disconnected. DVM in Diode Mode.
Connector P2 to Y
Connector P2 to Y
-
SUS P211 Voltages and Diode Checks
SUS P211 Voltages and Diode Checks
Voltage and Diode Mode Measurements
Pin 1
P2 Location: Top Left
There are no Stand-By voltages on this connector
Open
98V~102V
ER_COM
7~11
n/c
n/c
n/c
6
Open
*206V
+Vs
4~5
n/c
n/c
n/c
3
Gnd
Gnd
Gnd
1~2
Diode Check
Run
Label
Pin
P2 "Z-SUS" to "Y-SUS" P211
* Note: This voltage will vary in accordance with Panel Label