Lexmark E260dn Service Manual - Page 28
Overview of the operator panel, Power-On Self Test (POST) sequence, Error, light, Cancel, button - light indicators
View all Lexmark E260dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
4513-220, -230 Overview of the operator panel Paper jam light Toner light Error light Load paper light Cancel button Ready light Continue button Power-On Self Test (POST) sequence When the printer is turned on, it performs a POST. Check for correct POST functioning of the base printer by observing the following process: 1. All operator panel lights on momentarily 2. Lights then flash on and off sequentially. 3. After the lights quit flashing, the light flashes until the fuser comes up to temperature (5-20 additional seconds, depending on the initial temperature of the fuser) and then stays on. 4. If there is a problem in the printer such as a paper jam, then the panel lights indicate the problem. See "Common primary light patterns" on page 2-4 for more information. 5. The printer cycles down into standby mode, and lights solid. 2-2 Lexmark™ E260d, E260dn