Lexmark E260dn Service Manual - Page 56

4513-220, -230 Service tertiary error codes Service tertiary error codes Service error codes are generally non-recoverable except in an intermittent condition when POR (power-on reset) is performed which allows the printer to temporarily recover from the error. These error codes are recorded in the history file which can be reviewed through the Diagnostics Menu. See "Diagnostics mode selections" on page 3-8. Note: All service errors are initially communicated by all lights flashing which is the primary indication or code. For brevity, this indication is not repeated in the following codes. CAUTION: When this symbol appears, there is a danger from hazardous voltage in the area of the product that is being worked on. Unplug the product before beginning, or use caution if the product must receive power in order to perform the task. Controller software Codes 90x indicate a controller software error/illegal trap. For the other errors, which indicate a faulty programming process or faulty component on the controller board, replace the controller board. See "Controller board removal" on page 4-6. Service tertiary error codes: controller software Lights Service secondary codes: 90x ✷ Service tertiary codes 900: Service RIP software error ✷ 901: Service engine flash error ✷ ✷ 902: General engine software error ✷ ✷ 903: Service engine software error ✷ ✷ ✷ 904: Service engine software error ✷ ✷ 905: Interface violation by paper port device ✷ ✷ ✷ 906: Service engine software error ✷ ✷ ✷ Service watchdog: 90x ✷ ✷ ✷ 901: Timer service slow ✷ ✷ ✷ 2-30 Lexmark™ E260d, E260dn