Lexmark Multifunction Laser C77x - Menus and Messages Guide - Page 100
Standard Bin Full, Bin [x] Full, Toner Low, Tray [x] Empty, Tray [x] Low, Tray [x] Missing, Waiting
View all Lexmark Multifunction Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Understanding MFP messages Message Standard Bin Full Bin [x] Full [bin name] Full Toner Low Tray [x] Empty Tray [x] Low Tray [x] Missing Waiting Meaning Action The standard bin is full. x represents the number of the bin that is full. [bin name] specifies a previously defined name for the bin, such as Mary's bin, and it is full. Remove the stack of print media from the standard output bin or from the specified bin to clear the message. Note: These messages appear on the Menu Settings Page also. See Menu Settings Page for more information. The toner cartridge is low on toner. The Menu Settings Page shows the level. It takes an unspecified amount of time for the MFP to read the level of toner. Until the level is read, the MFP does not show the message. • The message clears automatically when the cover or door over the toner cartridge is opened or if the MFP power is turned off and then on. • Replace the toner cartridge. If it is not replaced, the MFP issues the message again when the door or cover is closed. x represents the number of the tray. The tray has no print media installed. 1 Remove the tray. The message clears. 2 Install print media in the tray according to the User's Guide. 3 Insert the tray. x specifies the number of the tray that is low. Load print media into the specified tray to clear the message. x represents the number of the tray missing from the MFP. The message is on the Menu Settings Page also. Insert the tray to clear the message. The MFP receives a page of data to print but waits for an End of Job command, a Form Feed command, or additional data. Press Stop. Touch Continue to print the contents of the buffer. Cancel the current job. Wait for the message to clear. Status messages 100