Lexmark Multifunction Laser C77x - Menus and Messages Guide - Page 37
Sets the USB port ENA Address.
View all Lexmark Multifunction Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Using the MFP menus Menu item USB Buffer Job Buffering Mac Binary PS ENA Address ENA Netmask ENA Gateway Purpose Values and descriptions Configures the size of the USB input buffer. Note: Changing the USB Buffer menu item automatically resets the MFP. Any permanent resources, such as fonts or macros, are lost. Disabled Auto* Job buffering is disabled. Any jobs already buffered on the hard disk are printed before normal processing of incoming jobs resumes. The MFP automatically calculates the USB Buffer size (recommended setting). 3K to maximum size allowed (1K increments) The user specifies the USB Buffer size. The maximum size depends on the amount of memory in the MFP, the size of the other link buffers, and whether Resource Save is set to On or Off. To maximize the range for the USB Buffer size, disable or reduce the size of the parallel, serial, and network buffers. This menu item is shown only when a formatted hard disk is installed. Temporarily stores jobs on the MFP hard disk before printing. Note: Changing the Job Buffering menu item automatically resets the MFP. It is reset to configure memory, and any permanent resources, such as fonts or macros, are lost. Off* On Auto Does not buffer print jobs to the hard disk. Buffers print jobs to the hard disk. Buffers print jobs only if the MFP is busy processing data from another input port. Configures the MFP to process On Macintosh binary PostScript print jobs. Off The MFP filters PostScript print jobs using standard protocol. The MFP processes raw binary PostScript print jobs from computers using the Macintosh operating system. Note: This setting often causes Windows print jobs to fail. Auto* The MFP processes print jobs from computers using either Windows or Macintosh operating systems. Sets the USB port ENA Address. Sets the USB port ENA Netmask. 4 field IP address (0.0.0.0*) Shown only if an ENA is attached through the USB port. Sets the USB port ENA Gateway. Network/Ports 37